제조사 웹사이트 바로가기
API FOOD POISON DETECTION KIT
Product Description and Use
ChemSee distributes the API Food Poison Detection Kit for detecting dangerous levels of more than thirty poisons. The detected poisons include compounds containing cyanides, azides, chromates and sulfides (Group I Poisons), thallium, lead, cadmium and mercury (Group II Poisons) and ALL arsenic-containing compounds (Group III Poisons). 1 to 7 grams of sample are required, depending on the food tested.
Kit Features
- Contains ALL NECESSARY TOOLS for complete analysis
- Detects poisons in food and stomach content
- 12 Month Shelf Life
- Full Instructions provided with each Kit
- Training DVD Available
- Validated on over 100 different food materials
· Available Detection Kits
· KT-06 API Food Poison Detection Kit
- Three detectors (Group I, Group II and Group III Poisons), all materials for sample preparation, built-in Quality Assurance. This includes full color instructions and a training DVD with instructions and examples of testing.
· KT-06R API Food Poison Detection Kit
- Three detectors (Group I, Group II and Group III Poisons), all materials for sample preparation, built-in Quality Assurance. The KT-06R does not include a training DVD.
DETECTORS FOR HEAVY METAL
Overview
Concerned over exposure to heavy metals from well water or old pipes? Worried that your illness may be caused by excess heavy metals?
ChemSee now offers detectors which can be used to test the water, foods, liquids and many other types of samples for the presence of heavy metals.
Use Instructions
Prepare the Sample:
- Chop solid foods up into small pieces and mix with an equal portion of water. If the remaining mixture is very thick, add an additional equal portion of water. Mix well for 3 minutes.
- Liquid samples are used as-is.
Test the Prepared Sample:
- Remove the Sealed Vial and Test Paper (small paper square) from it’s outer packaging.
- Carefully open the Glass Vial, making sure that none of the liquid inside is spilled.
- Place the test paper inside the tube and tightly seal the lid.
- Shake the tube for 5 seconds and allow the liquid to settle.
- Carefully open the Glass Vial, making sure that none of the liquid inside is spilled.
- Add the sample liquid up to the line marked on the glass vial.
- Shake vigorously for 15 seconds then allow liquid to separate for an additional 60 seconds.
- Compare any color formed to the opposite side of this card to identify any heavy metals.
DETECTORS FOR TRACE LEVELS OF ARSENIC
Overview
Introducing the Only Arsenic Detector that Detects Arsenic at the Levels Required by EPA and FDA Standards The AJ-LOW-01 Trace Arsenic Detector is capable of detecting as low as 1 part per billion (ppb) of arsenic in Water. The AJ-LOW-01 Arsenic Detector is also able to detect trace amounts of Arsenic in foods which may naturally contain Arsenic such as Rice, Fish, Grains, Soy, Apple/Orange Juice, Wine and Beer (using the AJ-LOW-WN).
Product Features:
The GHM-01 Generic Heavy Metal Detector rapidly and easily detects common heavy metals including: lead, thallium, mercury, cadmium, iron, nickel and zinc.
- Simple, Color-based Detection
- Results in 15 to 60 Seconds
- Low-Cost Analysis
Features
The Main Features of the AJ-LOW-01 Detectors Includes:
- Tests can be done at home,
- Tests give the results in a very short period of time,
- Tests are done at high accuracy,
- There are no other interferences with the tests, and,
- Results are seen as a color change.
Home